Billable vs non-billable hours: the hidden reason freelancers undercharge | TurnetFinance
Earn in Dollars

Billable vs non-billable hours: the hidden reason freelancers undercharge

You worked eight hours today. You billed five. The other three went to writing proposals, answering an unpaid client, fixing an invoice, learning a new tool, and scrolling through job posts. Nobody…

Billable vs non-billable hours: the hidden reason freelancers undercharge

You worked eight hours today. You billed five. The other three went to writing proposals, answering an unpaid client, fixing an invoice, learning a new tool, and scrolling through job posts. Nobody paid for those three hours.

Quick answer: You work 8 hours but bill 5. The unpaid 3 are why your rate feels too low. Learn how non-billable time changes your hourly rate, with real 2026 figures.

That is the hidden reason most freelancers undercharge. They set their rate by dividing what they need by the hours they work, then bill only some of those hours. The rate looks right on paper and feels wrong at the end of the month, because the maths assumed every hour was billable.

This article shows you what counts as billable and what does not, how to measure your real split, and how much the unpaid hours change the rate you need to charge.

Figures checked November 2026. Rate and fee figures come from Nigerian freelance guides published in 2026, with sources and dates named. Where a figure could not be found from a real source, this article says so.

What billable and non-billable actually mean

Billable hours are the hours a client pays for. On an hourly contract, they are the hours the tracker records. On a fixed-price project, they are the hours inside the project fee. Non-billable hours are everything else you do for the business that no client pays for: writing proposals, pitching, invoicing, chasing late payment, learning, maintaining your portfolio, and searching for the next job.

The two kinds of hour feel identical while you are working them, and only one of them earns money. A freelancer who works 40 hours a week and bills 30 is not a 40-hour-a-week earner. They are a 30-hour-a-week earner with a 10-hour-a-week unpaid second job, running the business.

The Freelance Rate Calculator handles the split with one input: non-billable %, the share of your working time that no client pays for. Its formula is:

Billable hours = days × hours per day × (1 − non-billable %)

If you work 20 days a month at 8 hours a day, that is 160 hours of work. At 0% non-billable, all 160 are billable. At 25%, only 120 are. At 40%, common for a beginner who pitches constantly, only 96 are.


The maths: how unpaid time changes your rate

The rate formula from the Freelance Rate Calculator is:

Hourly rate = (desired monthly income + monthly expenses) ÷ billable hours ÷ (1 − tax %)

Watch what happens as the non-billable share rises, using the tool’s own worked example: a freelancer who wants ₦400,000 a month, with ₦50,000 a month in expenses, and no tax set-aside in the first pass. The target is ₦450,000 a month in every row, only the billable hours change:

Working patternTotal hoursNon-billable %Billable hoursRequired hourly rate
20 days × 6 hrs1200%120₦3,750
20 days × 6 hrs12025%90₦5,000
20 days × 6 hrs12040%72₦6,250
20 days × 8 hrs16025%120₦3,750
20 days × 8 hrs16040%96₦4,688

Check the arithmetic: ₦450,000 ÷ 96 = ₦4,687.50, or about ₦4,688. At 25% non-billable time, the same freelancer needs a rate a third higher than the simple version, ₦5,000 instead of ₦3,750. At 40%, the rate is two-thirds higher, ₦6,250. The two rows that both give ₦3,750 tell the other half of the story: working 8 hours a day with a quarter of it unpaid produces the same billable hours as working 6 hours a day with none of it unpaid.

Now add the 10% tax and contingency set-aside, which divides the rate by 0.90: ₦5,000 becomes about ₦5,556 an hour; ₦6,250 becomes about ₦6,944. Add the platform cut on top: through Fiverr’s 20% commission, a freelancer who needs ₦5,556 an hour after costs must charge ₦6,945 (₦5,556 ÷ 0.80). Through Upwork’s flat 10%, the same freelancer must charge ₦6,173 (₦5,556 ÷ 0.90). The unpaid hours, the tax set-aside and the platform fee compound. Each one multiplies the last, and the final rate can be nearly double the simple figure.

Verdict: the rate you need is set by the share of your time nobody pays for.


The worked example: 120 hours is not 120 billable hours

The tool’s worked example assumes 20 days × 6 hours = 120 hours, and treats all 120 as billable. That is the example’s assumption: a freelancer with no admin, no pitching and no chasing, someone whose clients arrive, pay, and never need a follow-up. Take the same example and make it realistic. The freelancer works 6 hours a day, 20 days a month, 120 hours of work. One quarter of it, 30 hours, goes to writing proposals, answering messages, invoicing and chasing a late payment. Billable hours are 120 × (1 − 0.25) = 90. The rate for the same ₦450,000 target is ₦450,000 ÷ 90 = ₦5,000 an hour, and the daily rate is ₦5,000 × 6 = ₦30,000 a day, but only 4.5 of those 6 hours are billed, so the billed day is worth ₦22,500, though it feels like ₦30,000 of work.

Now the same freelancer with a better pipeline: half the pitching time, because repeat clients bring half the work. Non-billable time falls to 12.5%, billable hours rise to 120 × 0.875 = 105, and the rate falls to ₦450,000 ÷ 105 = ₦4,285.71, or about ₦4,286 an hour. The business got more efficient, and the rate the market needs to bear fell by ₦714 an hour. The prize of cutting non-billable time: not working less, but charging less for the same income.

DavidWrites (September 2026) works an example of its own: a target of ₦150,000 a month divided by 60 billable hours gives ₦2,500 an hour as a minimum, before adding about 30% for fees, taxes and non-billable time, which takes it to ₦3,250 an hour. The guide’s 30% uplift does the same work as the formula’s non-billable % and tax % combined, in one rough number; the formula is better, because it shows which of the three is costing you most, usually the unpaid time.


Where the unpaid hours go: pitching, admin and chasing payment

Non-billable time is four things.

Pitching and proposals take the most time for beginners. Writing a proposal for a job you do not win is unpaid work, and a beginner may write ten to win one. Each proposal takes an hour or two, so ten proposals are ten to twenty unpaid hours for one paid project. Pitch better instead: a portfolio link instead of a fresh sample, and no full proposal for a client who has not shown a real budget.

Admin is the second slice: invoicing, bookkeeping, contracts, tax records, and the messages that keep a project moving.

Chasing payment is the third, and the most resented. A client who pays late has taken your billable hours and turned them into non-billable ones, you did the work, but the money is not in your account, and the chasing is unpaid. The fix: a clear payment term in writing, and a late fee.

Learning and tools are the fourth. A new skill, a new tool, a new platform, all unpaid, all necessary. Unlike the other three, learning pays off later: the designer who learns a new tool bills it next month. Treat learning as an investment with a return date: learn the thing your next client will pay for, not the thing that looks interesting.


A laptop showing freelance job listings with a cup of coffee

The cost of finding work: Upwork Connects in 2026

Pitching on Upwork has a direct cash cost as well as a time cost. Connects, the credits you spend to submit a proposal, cost $0.15 each, and most proposals cost 8 to 16 Connects, or $1.20 to $2.40 per proposal (BidCrafter, July 2026). Active bidders spend $40 to $70 a month on Connects. At the official exchange rate of ₦1,349.34 per dollar on 9 November 2026, that is about ₦53,960 to ₦94,430 a month, a cost that belongs in the monthly expenses line of the rate formula.

A freelancer who submits 30 proposals a month at 12 Connects each spends 360 Connects, or $54 a month. If they win three jobs from those 30 proposals, each win cost $18 in Connects alone, before the hours spent writing them. If they win one job, it cost $54. The Connects are spent whether the proposal wins or not. They are a cost of pitching, not a cost of working.

Fiverr works the other way: clients come to the gig, so there is no bidding cost, but the platform takes a flat 20% of every transaction, against Upwork’s flat 10% (FeeKit; BidCrafter, 2026). The choice is partly between paying to find work (Upwork’s Connects) and paying more when you find it (Fiverr’s 20%). Neither is free; both belong in your rate.

Upwork to Payoneer costs $0.99 per withdrawal, Fiverr to Payoneer $1, Payoneer to a local bank $2, and a wire transfer from Upwork costs $25 (RemoGrid, October 2026). A freelancer who withdraws $100 ten times pays about $30 in fees; one who withdraws $1,000 once pays about $3. Small, frequent withdrawals are another quiet non-billable cost, money lost to the route, not to the work.


A freelancer negotiating with a client on the phone

How to measure your own split in two weeks

You cannot fix a number you have not measured, and measuring it takes two weeks, not a system.

For fourteen days, keep a simple log: the date, each block of work, what it was, and whether a client paid for it. A block is any stretch of work longer than fifteen minutes. Write it down at the end of each day, not from memory at the end of the week. Two columns are enough, billable and non-billable, with a one-line note on what the non-billable block was.

At the end of two weeks, add both columns. If you worked 80 hours and billed 60, your non-billable share is 25%. If you worked 80 and billed 48, it is 40%. That single percentage goes straight into the Freelance Rate Calculator as the non-billable %, and the rate it gives you is the first honest rate you have ever had.

Then look at the notes, not just the total. If pitching is half of it, your pipeline is the problem. If chasing payment is half, your payment terms are. If admin is half, your systems are. The log tells you which part of the business to fix first.


A freelancer tracking her working hours in a notebook

Cutting non-billable time without cutting corners

The goal is not zero non-billable time. A freelancer with no pitching has no pipeline, and one with no admin has no business. The goal is to cut the waste, not the work.

First, build a pipeline that brings repeat work. A repeat client costs almost no pitching time, a message, a quote, a start date. An established freelancer earns $1,000 to $5,000+ a month (NaijaSabi, November 2026) not because they charge more per hour, but because they spend less time finding the next job. Every repeat client is a reduction in your non-billable %.

Second, templatise everything repeatable: proposals, contracts, invoices, onboarding messages, and the answers to the five questions every client asks. A template you customise in ten minutes beats a fresh document that takes an hour, and the client cannot tell the difference.

Third, charge for what used to be free. A discovery call that runs to an hour is billable time, not a favour, fold it into the project fee, or charge for a paid consultation. A revision round beyond the agreed number is billable, not goodwill. The line between billable and non-billable is partly a decision, and freelancers who draw it clearly earn more at the same rate.

Fourth, batch the admin. Invoices on Friday. Proposals in the morning, client work after lunch. One day a week for the business, four for the clients. Context-switching between pitching and working is itself unpaid time, every switch costs minutes that appear in neither column.

Fifth, know the number that changes everything: the non-billable % at which your rate becomes uncompetitive. If your rate at 40% non-billable is ₦6,250 an hour and the going range for your skill tops out at ₦5,000 (RemoGrid’s junior developer range is ₦5,000–₦10,000; a junior designer’s is ₦3,000–₦7,000, October 2026), the market will not pay your rate, not because you are too expensive, but because your business is too inefficient. The fix is to cut the unpaid time until the rate fits the market, not to cut the rate.


Emeka’s story: the writer who found 15 hours a week

Emeka writes content for blogs and business websites. For his first year he charged ₦5,000 per article to Nigerian clients, inside the DavidWrites entry-level range of ₦2,000–₦8,000 per article (September 2026), and he wrote ten articles a week. He thought he worked 40 hours a week; his two-week log showed 55 hours worked and 40 billed: fifteen hours a week went to pitching, invoicing, chasing two late payers, and rewriting samples for clients who never hired him.

This story is an illustrative example built from the published 2026 rate ranges in this article, not a real person.

Fifteen hours is more than a third of a working week, unpaid. At his article rate, those fifteen hours were worth roughly four articles a week, about ₦20,000 a week, or ₦80,000 a month, that he was giving away to the business instead of billing. He did not raise his rate first. He fixed the leak: a proposal template that cut pitching from two hours to thirty minutes, invoicing on Fridays only, a 50% deposit before starting, and a rule against free samples for new clients.

Six weeks later his log showed 48 hours worked and 40 billed, non-billable time down from 27% to about 17%. He was working seven hours less a week and billing the same 40, and the rate his formula gave him fell because his billable share rose. He still charges ₦5,000 an article to Nigerian clients and more to international ones. Now he knows what an hour is worth, because he knows how many of them he sells.


A freelancer finishing work at her desk in the evening

Frequently Asked Questions

What counts as a billable hour?

Any hour a client pays for, hours on an hourly contract, and the hours inside a fixed-price project’s fee. Everything else is non-billable.

What is a normal non-billable percentage for a freelancer?

There is no published average, and no platform releases one. The worked examples use 25% as a realistic figure and 40% as a common beginner figure, measure your own for two weeks.

How much does non-billable time change my rate?

On the tool’s example, ₦400,000 a month wanted, ₦50,000 expenses, the rate is ₦3,750 an hour at 0% non-billable, ₦5,000 at 25%, and ₦6,250 at 40%. Add a 10% tax set-aside and the 25% figure becomes about ₦5,556 an hour.

How much does it cost to bid for work on Upwork?

Connects cost $0.15 each and most proposals cost 8 to 16 Connects, or $1.20 to $2.40 per proposal; active bidders spend $40 to $70 a month (BidCrafter, July 2026), about ₦53,960 to ₦94,430 a month at the official rate of ₦1,349.34 per dollar on 9 November 2026.

Is Fiverr or Upwork cheaper for a freelancer?

Upwork charges a flat 10% on billings plus the cost of Connects to bid; Fiverr charges a flat 20% on every transaction but nothing to bid (FeeKit; BidCrafter, 2026). On a $1,000 project, Upwork takes $100 and Fiverr takes $200, but the Upwork freelancer also paid to win the job.

How do I reduce my non-billable hours?

Repeat clients first. They cost almost no pitching time. Then templates, deposits before starting, batching admin into one day a week, and charging for discovery calls and extra revisions.


The Bottom Line

You do not have an hourly rate problem. You have an hours problem, the hours nobody pays for. A freelancer who works 120 hours and bills 90 is not undercharging by accident. They are charging a rate built for 120 billable hours and living on 90, and the gap is the shortfall they feel at the end of the month.

What you cannot control is that the unpaid work exists: someone has to pitch, invoice, learn and chase, and if you do not do it, nobody will. What you can control is how much of it there is, and whether your rate accounts for it. Measure the split for two weeks. Put the real percentage into the calculator. Then fix the biggest slice, the pitching, the chasing, the admin, and watch the rate you need fall while the money you keep stays the same.

The Freelance Rate Calculator has a field for non-billable time. Fill it in honestly, and the rate it gives you will be the first one that survives contact with a real month.

Related: How to Receive Dollar Payments in Nigeria: Wise, Payoneer, Grey & What Nobody Tells You About the Fees | How Much Salary Is Enough in Lagos? (The 2026 Answer) | Monthly Budget for a Single Nigerian: 2026 Template

Share this guideWhatsAppXFacebook
Abraham Adebisi
Abraham Adebisi
Founder, TurnetFinance

Abraham Adebisi is the founder of TurnetFinance. He builds free finance tools and writes honest guides about money in Nigeria, from land and rent to loans and saving.

About Abraham →

Money sense, weekly.

New tools, app reviews and guides in your inbox. Free, with no spam.

A smiling Nigerian businesswoman
TurnetFinance

Place your business in front of over 3,000 monthly users

Money-minded Nigerians come here to decide. Reach them while they’re paying attention.

Book your spot